During the cutting of wood, Rapid Splitter will inevitably produce some slag. There is no problem at the beginning, but over time, as more and more slag accumulates, it will affect the efficiency and stable operation of the equipment. In this case, how to properly handle these slags, or is there any way to reduce the appearance of slags?
1. Adding too many Rapid Splitter blades will also cause a large number of debris to appear, which can reduce the number of blades.
Two. Choosing the right Rapid Splitter to work can effectively reduce the generation of slag. This mainly depends on the local working environment to determine what machine to use to work. Choose the right machine to better improve work efficiency. Inappropriate products will inevitably cause various problems during use.
3. The gap between the fixed knife and the movable knife is too small. Adjust the gap distance between the fixed knife and the movable knife according to the corresponding standards to allow it to operate normally.
There are too many slags in the use of Log Splitter . Most of the reasons are due to the user's failure to grasp the correct use method during use, such as poorly adjusted equipment related parts distance, unreasonable working environment, and blade installation The quantity does not meet the requirements for use, etc., which may cause too much slag in the equipment, resulting in a decrease in the working efficiency of the equipment, so such problems should be avoided during use.